This function describes the envelope of the displacement curve . 這函數描繪出位移曲線的包絡。
The calculation of these velocity and displacement curves from the accelerogram is not a trivial matter . 要從加速度記錄計算速度和位移曲線也不是一件輕而易舉的事。
The force and displacement curves were obtained 得到了空氣彈簧橫向剛度特性的曲線圖。
Before design cam , the tappet displacement curve has to be design 在設計凸輪之前,首先進行挺柱升程曲線的設計。
According to the tappet displacement curve , the design of cam profile can be carried out by " reversal method " theory 根據得到的挺柱升程曲線,利用“反轉法”的原理進行凸輪輪廓曲線的設計。
And we measure the voltage ? displacement curve through examinations which can provide theoretics for the transducer ’ s use in mechine 在機械方面,提出了cymbal換能器堆疊結構,并測量了其電壓位移特性。
When rotating into force , in accordance with the cam roller set displacement curve effort rotating turret , while the ramps along the rib rolling 當入力軸旋轉時,凸輪滾子按照設定的位移曲線旋動出力轉塔,而同時又沿肋的斜面滾動。
The formation and formation reason of inertial force during the impact tests were studied by the force - displacement curve to determine the inertial force 摘要利用儀器化動態沖擊機測試力位移曲線,研究了沖擊過程中慣性力的產生,并分析了其產生原因,以確定慣性力。
The loading - displacement curve was consistent with the loading - energy curve , and the both could explain the whole dynamic course and the phenomena of dynamic instability 結構的荷載一位移曲線與荷載一應變能曲線具有一致性,都能體現結構的動力變化過程和解釋動力失穩的現象。
Comparison of these two methods was completed by comparing the displacement curve and the velocity curve . strongpoint and demerit of each method were concluded 通過幾次試驗的對比分析,其中包括目標彈的位移曲線和速度曲線的對比,充分證明了兩種方法的可行性并指出各自的優缺點。